With the Multi Purpose Valve (MPV) the possibilities to get the valve custom made exactly according to every diver's need are almost innumerable.
The patented MPV- system from Poseidon has thrown away old truths about tank valves and eliminated earlier difficulties for a scuba diving shop to always be able to offer a number of valve combinations. With the MPV we can, from a couple of modules. quickly and simply, give you as a diver over 145.000!! different combination possibilities. In other words, you can place and configure your valve exactly the way you want, where the main components are the same for every kind of diving. As you get more experien- ced and change your kit configuration, for an example larger cylinders or a twin set, you just change your modular valve assembly exactly the way you want. |
 |
STEP 1
The starter. If you want to twist the outlet away from the neck a little bit?
No problem. |
|
STEP 2
The outlet sraight to the side and the wheel on the other side for lowest possible profile.
Perfect for wreck diving |
|
STEP 3
The outlet at a 90 degrees angle, pointing upwards or backwards.
No problem. |
|
STEP 4
With two regulators or six if you want to feel extra safe. Where you can close one by one with continuous air supply from the single tank. |
|
STEP 5
More regulators on every tank, even a twin tank, it makes you feel safe in almost every situation. |
|
